Textile Biodegradability Testing

Evaluate how textiles break down—safely and measurably

Biodegradability testing helps you understand how textile materials behave at the end of their life cycle. Hohenstein provides standardized and customized testing to assess how products break down in soil and aquatic environments - and whether residues are safe for the environment.

This data enables you to make credible sustainability claims, reduce environmental risk and meet growing regulatory and market expectations.

Why does biodegradability matter?
Textiles that are not reused or recycled often end up in landfills or the natural environment. Understanding how materials degrade is essential to:

  • Evaluate environmental impact at end of life
  • Support circular product strategies
  • Reduce risk of harmful residues in soil and water
  • Prepare for evolving regulations, such as Extended Producer Responsibility (EPR)
What We Test

Product and Impact Assessments

We evaluate both material degradation and environmental impact:
  • Degree and rate of biodegradation
  • Behavior of fibers, coatings and finishes
  • Release and impact of residues during degradation
  • Ecotoxicological safety for soil and aquatic environments

Applications include apparel, home textiles, technical textiles and materials used in consumer products.

How We Test

Controlled Conditions for Biodegradation

We design biodegradability tests to deliver reliable, comparable and real-world relevant results.

Simulating real-world conditions
Testing is performed in controlled laboratory environments that reflect natural conditions, such as soil or aquatic systems. This allows us to evaluate how materials behave at end of life, while maintaining the consistency needed for meaningful comparison.

Standardized and reproducible methods
Testing is performed under defined conditions to ensure:

  • Reproducibility
  • Reliable data for product development and claims verification
  • Comparability across materials, products and development stages

Time-based evaluation of material behavior
A time-based approach provides a more complete picture than single-point measurements. This includes monitoring changes in:

  • Material structure
  • Mass loss and integrity
  • Progress of degradation

Assessment beyond degradation
Biodegradability alone is not enough. We also evaluate whether degradation leads to environmentally safe outcomes, including:

  • Analysis of residues after degradation
  • Assessment of potential environmental impact

Reliable and comparable results
The result is clear, science-based data that supports:

  • Product development decisions
  • Material selection
  • Verified sustainability claims
  • Communication with regulators and customers
Applications

Biodegradability tests are used in sourcing, product development, claim verification, quality assurance and circularity initiatives

by textile manufacturers, finishers, brands and retailers
  • Objective measurement of biodegradability in soil
  • Verification of claims
  • Product optimization and sourcing based on data
  • Determination of product's risk to the environment
  • Quality assurance based on ecotoxicological considerations

Biodegradability Test Methods

Hohenstein combines standardized ISO-based methods with application-specific approaches to evaluate biodegradation and environmental impact.
ISO - Basis Test Methods

Customized Testing Based on Standardized Methods

The Hohenstein test methods were developed based on international standards:

  • ISO 11721: Textiles - Determination of resistance of cellulose-containing textiles to micro-organisms - Soil burial test - Part 1: Assessment of rot-retardant finishing

    Hohenstein Procedures:
    • Under defined laboratory conditions - with incubation in standardised test vessels - under constant, natural-like climatic conditions (25 °C ± 1 °C).
    • Standardized test soil under aerobic conditions with biological activity monitored against a reference sample
    • Sampling and sample preparation after three defined excavation dates (may vary depending on the product)
    • Evaluation - after the specified test period - by determining the degradation rate of the test samples with quantitative assessment of mass loss
    • Environmental impact assessment - ecotoxicological tests to assess impact of the degradation products with optional chemical analyses
    • Typical timeframe: At least 3 months, up to 1 year, depending on the material and scope
       
  • ISO 17556: Plastics - Determination of the complete aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide produced

    Hohenstein Procedures:
    • Uses a closed respirometer method to assess biodegradation in soil at 25 °C
      A closed respirometer measures how much oxygen microorganisms consume to degrade a material in soil, thereby enabling a precise calculation of its biodegradability under controlled conditions.
    • Typical timeframe: 6 months
       
  • ISO 846: Plastics - Evaluation of the action of microorganisms on plastics
    Evaluates the degradation behavior of tree shelters and other forestry devices of non-fossil origin under forest-like aerobic forest soil conditions

    Hohenstein Procedures:
    • Under defined laboratory conditions - with incubation in standardized test containers - under constant climatic conditions similar to forests (16 °C ± 0.5 °C)
    • Standardized forest soil with a humus layer - under aerobic conditions - with biological activity monitored against a reference sample
    • Sampling, sample preparation and sample analysis at 4 defined excavation times (3, 6, 9, 12 months)
    • Evaluation - after the specified test period - by determining the degradation rate of the test samples with quantitative assessment of mass loss
    • Typical timeframe: 12 months
In Soil

Hohenstein Soil Burial Method

Biodegradation in Soil

Evaluation of textile materials in natural, aerobic soil conditions using staged excavation and ecotoxicological assessment.

  • Assesses degradation behavior and residue impact
  • Evaluates over a defined test period

Typical timeframe: Minimum 3 months to up to 1 year, depending on material and scope

DIN SPEC 19296 - In Soil

Textiles - Investigation of biodegradability and ecotoxicity in soil under realistic conditions - Test method

DIN SPEC 19296 is a standardized test method for assessing the biodegradability and ecotoxicity of textile fibers and fragments in soil. The method evaluates how textile fragments degrade under defined soil and climatic conditions and whether degradation residues affect plants or soil organisms. 

Testing includes evaluation at defined time points with staged excavation, combined with ecotoxicological assessment to evaluate both material breakdown and environmental safety.

By combining biodegradability testing with ecotoxicological assessment, DIN SPEC 19296 provides a consistent basis for comparing textile materials and validating environmental claims, such as ‘compostable’.

Read Press Release

Typical timeframe: 6 months

DIN SPEC 35808 - In Forest Soil

Tree shelters made from renewables - biodegradability and disintegration under simulated forest conditions

DIN SPEC 35808 is the first standardized framework for verifying whether tree shelters made from renewable raw materials will biodegrade completely and disintegrate under conditions that replicate forest environments – without leaving harmful substances behind.

Testing for biodegradability follows a two-stage process:

  1. Mineralization and Ecotoxicity
    Materials must achieve 90% or greater mineralization within 24 months under controlled soil conditions, assessed using ISO 17556 respirometry, and pass ecotoxicity screening with no heavy metals detected. Only materials that meet those thresholds advance to the second stage.
  2. Disintegration under Simulated Forest Conditions
    Assessment in which the material must break down faster than untreated pine heartwood within 12 months

Hohenstein developed DIN SPEC 35808 in collaboration with Rottenburg University of Forestry, forestry authorities and industry partners. It provides forest owners, forestry operations and manufacturers a verifiable basis for product decisions – and supports materials designed to be left in place after use.

Read Press Release

Typical timeframe: Up to 24 months, depending on scope

In Sludge

DIN EN ISO 14851 - In Sludge/Wastewater

Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by measuring the oxygen demand in a closed respirometer

DIN EN ISO 14851 uses a closed respirometer method to assess biodegradation in aqueous environments, such as wastewater treatment conditions.

A closed respirometer measures how much oxygen microbes use to break down a material in water, allowing precise calculation of its biodegradability, under controlled conditions.

In DIN EN ISO 14851, the test:

  • Places the sample in a sealed (closed) vessel with microorganisms
  • Monitors oxygen uptake over time
  • Uses this data to determine how much of the material is biologically degraded

Uses a closed respirometer system, where microorganisms degrade the material in a sealed aqueous environment while oxygen consumption is continuously measured.

Oxygen demand reflects microbial degradation
Enables calculation of biodegradation under controlled conditions

Typical timeframe: 2–3 months

Microfiber Biodegradation

DIN SPEC 4872 (DIA) - In Water

Test Method for Textiles - Determination of fibre release during washing and aerobic degradation level in aqueous medium in consideration of ecotoxicity

DIN SPEC 4872 is a standardized test method for determining the environmental impact of textiles during washing. We examine how many fibers are discharged when textiles are washed, how well the fibers break down in wastewater and how harmful the fiber residues are for the environment.

Typical timeframe: 2-3 months

Reduce Microfiber Impact

Chemical Biodegradability

OECD 301 F: Testing Biodegradability Testing of Chemicals

Screening of chemicals for ready biodegradability in an aerobic aqueous medium

This test method defines the biodegradability of a chemical. It can be used for soluble and insoluble chemicals, such as detergents, cleaners, industrial chemicals (per REACH regulation), drugs and cosmetics. It categorizes the rate and extent of biodegradation at 22°C (71.6°F) within 28 days and further classifies inherent and persistent biodegradability.

OECD 301 F Test Method (Manometric Respiration Test):

  • To pass: Chemical must biodegrade by at least 60% within 10 days (during the 28-day test period)
  • Verifies: Compliance with the biodegradability requirements of various certifications (such as the EU Ecolabel) and serves as evidence under REACH to distinguish biodegradable polymers from regulated microplastics

Required info for testing:

  • Name and molecular formula of the chemical substance
  • Characteristic properties such as water solubility, vapor pressure, etc.
  • Material safety data sheet
Ecotoxicity

Ecotoxicological Assessment after Biodegradation

To evaluate environmental safety, additional testing is conducted after biodegradation.

Soil environments

  • OECD 207 (earthworm test) - impact on soil organisms
  • OECD 208 (cress test) - impact on plant growth
  • Typical timeframe: ~2 weeks following biodegradation testing (typically after 6–12 months, depending on method)

Aquatic environments

  • Method: ISO 20079 (duckweed test)
  • Evaluates the impact of degradation residues on aquatic plant life
  • Typical timeframe: ~2 weeks following biodegradation testing (typically after 2-3 months, depending on method)

Supporting analysis
Elemental analysis may be used in respirometer systems to support biodegradation calculations in soil and wastewater-related testing.

Contact

Ben Mead

Managing Director
Hohenstein Americas